1.800.426.3929

Contact

Login

Cedarbrook
Sauna + Steam

1.800.426.3929

3Ft Cedar Sauna Bench

3Ft Cedar Sauna Bench + others in sauna interior
Sauna Interior All Glass Front
Sauna Bench Corner Example
Sauna bench facing. Adds a back rest to your low sauna bench
Duckboard Flooring on the Sauna Walking Area Only. Also shown: Benches Facing
sauna bench top and bottom
Sauna Benches Stacked in the Shop
Sauna Benches + Back Rests + Vertical Wall Cladding in old sauna pro club
High Bench Leg Supports Sitting on Low Bench

3Ft Cedar Sauna Bench

3Ft cedar sauna bench for home saunas, commercial spas and clubs

Our sauna benches are made of beautiful clear Western Red Cedar with blonde, pink, red and chocolate colors

Current lead time for sauna benches: 4-6 weeks

3Ft Cedar Sauna Bench features

  • Made of 100% Western Red Cedar!
  • Bottom-screwed with NO exposed fasteners
  • 2×2″ cedar runs the length of the bench
  • Faced with 5/4 × 4″ cedar and framed with 2×3″ cedar
  • Dimensions: 18″ wide (optional) × 3 feet long with STANDARD ends — you’ll cut to size

REGARDING SELECT CEDAR GRADE: Occasionally, we see dime-sized knots or less. We try our best to use only the cleanest clear cedar wood.

NOTE: 2×2″ lumber actually measures 1½ x 1½″. Bench facing and backrests are NOT included. See options below to add facing and back rests

$175

  • Please add each of your sauna benches one by one

    You can add HIGH and LOW benches

    Select all options for your first bench, then click "Add to Cart". Go to your next length bench and repeat.

    Note: In smaller saunas, you may need to recess the LOW bench under your HIGH bench.

    ACF Length

    Bench Width

    Widen the sitting area in 2" increments

    Bench Seat Profile

    Bench Seat Profile

    Standard Sitting Span = 18″

    Leg Supports

    ❯ Bench Level

    Bench Level

    How many legs are included? One pre-built FIXED leg assembly is included for every 3 feet of bench length + 1

    Is this bench a HIGH or a LOW bench?

    Also, note the follow up question as we must build the HIGH bench legs differently IF the HIGH bench overlaps the LOW bench.

    ❯ Bench Level

    Bench Level

    How many legs are included? One pre-built FIXED leg assembly is included for every 3 feet of bench length + 1

    Is this bench a HIGH or a LOW bench?

    Also, note the follow up question as we must build the HIGH bench legs differently IF the HIGH bench overlaps the LOW bench.

    IMPORTANT: We provide a "Fixed Leg" for every 3 feet of benching plus the end. Thus, with a 9 foot bench we provide: 9/3+1 = 4 legs
    IMPORTANT: If "Hot Yoga Style Ledges" selected, we provide ledges for the ends and the length of the bench (to set at the back wall)

    Standard Fixed Legs vs Hot Yoga Style Benches

    4x6 Showing Fixed Benches and Legs

    Fixed Benches

    Hot Yoga Benches Normal Position

    Hot Yoga / Normal

    Hot Yoga Benches Retracted Position

    Hot Yoga / Retracted

    "Fixed Legs" option does allow adding facing to the bench legs. It's NOT possible with "Hot Yoga Style Ledges"

    Since you clicked a HIGH bench with FIXED legs, we need to ask:
    Will your LOW bench partially fit under your HIGH bench? (especially true in a small saunas)... If so, we'll build the HIGH bench legs so they overlap the LOW Bench: 2-6″

    To see the differences in "Bench Overlap", choose 2, 4 or 6″ recess to see how it fits

    ❯ Bench Overlap

    Bench Video Set Low Bench in Place

    See our video showing a LOW bench recessed under a HIGH bench

    Benches Recessed Inside the Sauna (3:00)

    High Bench Profile / No Recess

    Parallel bench profile: 40" High 20" Low High bench 40" with parallel 20" low bench

    High Bench Profile IF Recessed 2-6"

    Bench Profile: High bench 40" with recessed 20" low bench High bench 40" legs for a recessed 20" low bench

    High Bench Profile / No Recess

    High Low Benches Profile Diagram In Parallel High bench 36" with parallel 18" low bench

    High Bench Profile IF Recessed 2-6"

    High Bench Profile Recessed High bench 36" legs for a recessed 18" low bench

    Since you clicked a LOW bench with FIXED legs, we'll show you the LOW bench in two common sauna scenarios. Please review these bench profiles to guide your HIGH bench options

    20" LOW Bench Parallel Profile

    Parallel bench profile: 40" High 20" Low Parallel bench profile: 40" High / 20" Low

    20" LOW Bench Recessed Profile

    Recessed bench diagram profile: 40 High / 20 Low Recessed bench profile: 40" High / 20" Low

    18" LOW Bench Parallel Profile

    Parallel bench profile diagram: 36" High / 18" Low Parallel bench profile: 36" High / 18" Low

    18" LOW Bench Recessed Profile

    36" High and 18" Low Benches Recessed Profile Diagram Recessed bench profile: 36" High / 18" Low

    Bench Ends: Standard vs Finished

    Sauna Bench End: Standard (above) vs Finished (lower)

    Standard End (above) vs Finished End (below)

    STANDARD ends can be cut to length at your site

    • Cut to your bench to your perfect length (< 3′ )
    • We recommend cutting 1/8ths of an inch so your bench drops in without scraping your sauna walls
    • You MUST cut to length on-site. We don’t do this

    FINISHED ends are wrapped and mitered with 5/4×4″ cedar

    Most customers prefer our standard ends. However, if you have a glass front wall, you'll see the end grain of the bench. Finished ends create that "finished designer" look

    Bench Ends

    Bench Ends

    Benches have a STANDARD end (cuttable) OR a FINISHED end (wrapped in fascia board)

    If able to view your bench end, you may want it FINISHED — especially if you have a glass front wall

    We use 5/4 x 4″ clear cedar facia board on the bench front and finished ends

    For the STANDARD ends, the last support strut of the frame is removable, so you can easily cut the bench. See the FAQ below: How to cut our benches?

    Both Ends Standard

    Open L End Open R End bench diagram

    ↥ Front / TOP View of 3′ bench

    Standard L + Finished R

    Standard L End Finished R End bench diagram

    ↥ Front / TOP View of 3′ bench

    Finished L + Standard R

    Finished L End Standard R End bench diagram

    ↥ Front / TOP View of 3′ bench

    Both Ends Finished

    Finished L End Finished R End bench diagram

    ↥ Front / TOP View of 3′ bench

    Your bench will be cut to your CUSTOM LENGTH below (i.e. < 3 feet), thanks

    Your bench will measure EXACTLY 3 feet end to end UNLESS you select "Custom Length"

    Change Length

    Confirm Change the Length of this 3′ Bench

    Please confirm you want a custom length, then the custom end-to-end measurement box will display

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    ❯ Custom Length

    Custom Length Measurement

    NOTE: We highly recommend cutting your benches ON SITE as conditions may have changed. But if you know your exact length, please continue reading ...

    Enter your figure in INCHES, then adjust in 1/8th increments using up/down arrows

    IMPORTANT: IF your bench is spanning between two walls, subtract 1/8th inch, so it'll slip in without scraping your walls!

    How to cut our benches?

    Remove struts from sauna bench frame

    Remove struts from sauna bench frame

    Cutting the STANDARD bench end 

    • Turn the bench to access screws on the under side
    • Remove the end strut by removing the end screw and several in the middle
    • Cut the bench to your length. If your bench is to be placed between sauna walls, we recommend cutting 1/8″ more than your span. This way your bench drops in without scraping your sauna walls
    • Return the strut to its new position and reattach. Predrilling is NOT necessary with soft cedar wood

    Watch a video of sauna bench getting trimmed on site (go to 0:35 minute mark)

    Facing and Back Rests

    We recess the bench legs 3/4" so that the facing can be attached and will NOT protrude further than the front edge of the seat

    Light Under Sauna Bench Facing

    LOW Sauna Bench facing with a light underneath

    High Bench Diagram Profile + Facing High Bench Diagram Profile with Facing

     

    Add Bench Facing

    Add Back Rest

    SUPPLIED AS MATERIALS YOU BUILD ON SITE !!
    Sauna Benches + Back Rests + Vertical Wall Cladding in old sauna pro club

    Cedar Sauna Benches  Back Rests

    Notes

SKU SB-3FT Categories ,

Additional information

Weight 16 lbs
Dimensions 38 × 20 × 6 in