Cilindro 8 Freestanding 8kW sauna heater with built-in controls for saunas 200 – 431 cu. ft.

Harvia Cilindro 8kW sauna heater holds a large volume sauna stones and delivers a deep warmth your bones feel!

Cilindro 8kw sauna heater produces endless blasts of steam. The rocks are in direct contact with the red hot elements! Great for mid-sized residential saunas. Side wall or corner of room install. The built-in controls are super simple to wire, just like a light fixture.

The 180 lb. stone capacity (actual) keeps your sauna room hotter longer. Great if you like long breaks to rehydrate or rest between sauna sessions.

Cilindro 8 SAUNA HEATER FEATURES / HPC-HB Model:

• Stainless steel housing and elements
• Direct rock-to-heating element contact
• Industrial grade, serviceable heating elements
• Built-in controls: 1-8 hour preset time delay function + 60 minute running time. Requires NO additional power box or load center
• Includes 180 lbs of Vulcanite sauna rocks (4 boxes) / Capacity: 180lbs

IMPORTANT to Cilindro Sauna Heaters: To reach proper sauna room temperatures (between 170 – 200°F+), we recommend:

Keeping a channel clear (at the top of the triangle) for air to flow easily

Let the heater breath so hot air flows easily through and out of the appliance into the sauna room where we need it most

• Keeping an air channel around the sensor avoids over-heating and shutting down prematurely
• Put your largest rocks around the sensor creating a channel for good air flow, and
• Do NOT cover the sensor with small flat rocks (that will block air flow)

The sauna heater appliance should then reach hotter temperatures before shutting down thermostatically as normal. Heaters regulate sauna room temperatures by turning on and off. Moreover, always place rocks loosely for best air flow. Do NOT pack rocks as tight as possible. You will have extra rocks that will NOT fit in the unit regardless of how you place them.

Cilindro 8 sauna heater and rocks must be shipped on a pallet!